Standards: BS 1377:4
Automatic Mechanical Soil Compactor is manufactured as per the required BS 1377:4 industry Standards. Automatic soil compactors are designed to provide the fully automatic uniform compaction of the standard/modified and a CBR specimen which assures the conformity to the preferred standard. The automatic soil compactor is basically equipped with the programmable digital counter, which helps or allows the machine to stop at a preset number of the blows. To suit the test requirements, the weight and the height of the rammer is kept adjustable. The rammer is circular faced. The automatic blow pattern helps or ensures the effective compaction for each layer of the soil and a rammer easily travels across the mould. The number of blows can be easily set at the digital counter at the beginning of the test and hence table rotates the mould in the equal steps. A user can not only define the blow number but can also set the in-out distribution.
Automatic Soil Compactor BS EN Rammer the automatic mechanical soil compactors is designed to provide a fully automatic uniform compaction of standard / modified and CBR specimens assuring conformity with the reference standard. Compactor is equipped with programmable digital counter which allows machine to stop at the present numbers of blows. Automatic Soil Compactor weight is adjustable to 300 mm drop height and is also adjustable to 450 mm drop height and rammer is circular faced with a 50 mm diameter and is adjustable to 2.5 kg. or 4.5 kg.
The Automatic Mechanical Soil Compactor consists of the following items:
- A digital Counter to set blow number.
- The drop weight which can be adjusted to 300 mm and 450 mm drop height.
- A circular faced rammer with 50mm diameter, which can be adjusted to 2.5 kg or 4.5 kg.
- A CBR switch/standard proctor.
- An emergency start and stop push buttons located beside the blow counter.
- Suitable for 220 V, 50-60 Hz, single phase.