BITUMEN AND ASHPHALT TESTING RANGE

We are offering a quality assortment of Asphalt Concrete Cutter that has gained wide appreciation among our clients for its high speed operations. This cutter is basically used for cutting concrete and marbles in construction industry. Provided cutter is manufactured by our dexterous professionals using supreme quality components and progressive techniques in line with international standards.

The super pave PG binder specification looked for tests which would closely simulate field performance. Hot-mix asphalt binder experiences significant aging during the manufacturing and laying process. Investigating this phenomenon within a laboratory environment, with a repeatable and simple test is very useful within the design process. The rolling thin film oven (RTFO) test is used

Standards: BS 2000-45 ASTM D6, D 1754 AASHTO T 47, T 179 Loss on heating thin film oven test equipment, model no. 1318, confirms to the BS 2000-45 ASTM D6, D 1754 AASHTO T 47, T 179 industry standards, is used for testing the loss of heat and thin film test for asphaltic and bitumen materials. The

Standards: BS 598-107 Automatic Compactor for Bituminous Mixes apparatus (model no. SET-1317) conforms to the BS 598-107 industry standards. This instrument is used to speed up the process for preparing the specimens with much ease and accuracy as it is fully automatic. It automatically compacts the specimens or sample and stops after the preset number of blows

Pavement Core Drilling Machine apparatus designed as per the required industry standards. This instrument is powered by a petrol/diesel engine. The Pavement Core Drilling Machine is used for the purpose to drill the test scores from or holes in bridges, roads, airport runways, etc. This machine comprised of two vertical support columns with the screwed spindle

Standards: AASHTO T 256 Benkelman beam test apparatus, model no. 1315 conforms to the AASHTO T 256 industry standard is serving the needs or acting as a great resource of material for government agencies, contractors, consultant etc. in the transportation and other infrastructure industry. Benkelman beam is used to find many characteristics of the flexible pavement in

A straight edge approximately 3 meters in length may be used to determine lateral surface regularity of a road surface. This lightweight apparatus is made up of mild steel or aluminum as per customers requirement and is equally supported at both ends producing a set height between the road surface and the beam. Any vertical irregularity

A set of three moulds as per IRC-SP-53-2002 made of brass /gunmetal with the shape, dimensions and tolerances. The ends B and B` are known as clips, and the parts A and A’ are known as sides of the mould. The dimensions of the mould shall be such that when properly assembled it will form a

Standards: IS 1208-1058, ASTM D 113, IP32, 55, AASHTO T 51 Three bitumen aggregate samples can be tested simultaneously thus reducing the time for the professionals on site. The carriage moves smoothly through the single phase 230V (50Hz) AC motor that drives the reduction gear. Two speed options of 5mm/minute and 10mm/minute are available which allow differentiated

Mixer With Heating Jacket : This instrument is motorized carrying two speeds i.e. planetary or revolving. It comes with 6 ltr. Capacity mixing bowl for mixing the specimens fitted with Heating Jacket for heating the samples at the bottom of the bowl. The mixing bowl can easily be held and removed with the instruments and its